Wednesday, September 13, 2017
Carbon Nanotube Concrete Admixtures

Wednesday, October 11, 2017
Post Installed Anchors

Wednesday, November 8, 2017
Concrete Repair and Strengthening

Thursday, January 18, 2018
SunTrust Park Case Study

Tuesday, February 13, 2018
What Your Fabricator Wishes You Knew About HSS

Wednesday, March 14, 2017
Hartsfield-Jackson Landside Modernization

Wednesday, April 11, 2018
An Introduction of CRSI/Building Value and Voided Slabs

Wednesday, May 9, 2018
Professional Liability

Meetings are held at Hudson Grille - Brookhaven Registration begins at 6:00 pm, dinner at 6:30 pm.  The program time is 6:45 p.m. - 7:45 p.m. A certificate for one PDH will be provided. Cost is $30 for members, $40 for non-members, $20 for full-tme students. PLEASE NOTIFY SEAOG IF YOU PLAN TO ATTEND.


Southeast Wood Solutions Fair, April 25, 2018 | Georgia International Convention Center, Atlanta, GA | 6 AIA/CES HSW LUs, 6 PDH credits or 0.6 ICC credits. |
Register here.

With a full day of seminars and a trade exposition, the 2018 Southeast Wood Solutions Fair will pack an informational punch for architects, engineers, developers, code officials and everyone interested in wood's exciting design possibilities. Register today if you'd like access to wood design experts for one-on-one support, informative seminars, technical information from manufacturers, engineering consultants and industry associations, and exhibits featuring a wide range of structural and finishing products.

Session topics include, among others:

  • Better, Faster, Safer: Experiences of a Tall Timber Builder
    Jeff Morrow, Lendlease
  • Higher Education Facilities in Focus: The Versatile Nature of Mass Timber Construction
    Tom S Chung AIA LEED BD+C, Leers Weinzapfel Associates
  • Why Acoustics Matter: Demystifying Noise Control in Buildings
    Randy D. Waldeck, PE, LEED AP, CSDA Design Group
  • Lateral Design Considerations for Mid-Rise Wood Structures
    Terry Malone, PE, SE, WoodWorks
  • Shaft Wall Solutions for Wood-Frame Structures
    Ricky McLain, PE, SE, WoodWorks
  • The T3 Sequel: Applying Lessons Learned, Advancing Mass Timber and Improving LCA
    Leif Johnson, PE, SE, LEED AP, Magnusson Klemencic Associates
  • Timber-Frame Design: Structural Timber as an Architectural Feature
    Jim DeStefano, PE, AIA, FSEI, DeStefano & Chamberlain

Click here for a full list of sessions, descriptions and speaker bios.

On-site check-in: 7:30 am
Fair begins: 8:00 am
Fair concludes: 5:00 pm

Early-bird price is $120 through April 4, then $150. Includes lunch
We are extending a discount to the SEA of Georgia of 20% off the registration price. By using the code SEWSFASSOC members of SEAOG can register through April 4th for $96 (vs $120 without the code) and after April 4th for $120 (vs $150 without the discount).
For questions, contact Mary Schramka

Hosted by WoodWorks - Wood Products Council

April 26, 2018 Georgia Chapter Luncheon

Register today for the
ICRI Georgia
April Luncheon

Thursday, April 26, 2018
Maggiano's Little Italy - Dunwoody
11:15 am - 1:00 pm
Arrival/Registraton: 11:15 - 11:30 am
Lunch & Announcements: 11:30 - 1:00 pm
Networking: 11:15 am - to 1:00 pm

$30.00 - Members
$20.00 - Students
$40.00 - Non-Members / Walk-ins / No Show Fee
$5.00 - Scholarship Donation

Click Here to Register

ICRI - What's in it for ME?

Members and non-members often ask about the benefits of membership in ICRI - "What's in it for me?" ICRI VP, Mark LeMay, will provide some answers to this vexing question based upon his personnel experiences since joining ICRI in 2005. The topic will be approached from two perspectives - ICRI involvement at the local Chapter level and also at the National level. From networking opportunities to standard-in-the-industry guidelines, to certification programs, to editable guideline specifications to on-line webinars - come and see what ICRI has to offer you to help you elevate your company above your competition, and take your career to the next level!

Mr. Mark LeMay, AIA

Principal - JQ Engineering
Vice President - ICRI National

Mark LeMay, AIA is a Principal with the multi-disciplined engineering firm of JQ Engineering, and leads JQ's Facility Performance team out the firm's Fort Worth office. During his nine years at JQ, Mark has been responsible for the documentation and evaluation of numerous existing structures prior to the development of construction documents for projects involving the repair, renovation, restoration or alteration of those structures. His projects have ranged from historic houses to parking garages to multi-story buildings to stadiums such as the Cotton Bowl.

Be Prepared to help in a disaster.

Come join us for an all-day Disaster Assessment training course.

  • Wednesday May 09th, 2018;
    Registration 7:30 am 8:00 am to 4:30 pm
  • Gwinnett Department of Water Resources
    • 684 Winder Highway,
    • Lawrenceville, Ga. 30045
    • Large Training Room 1st floor
  • Cost $120.00 (includes training material and ATC handbook 20-1 and 45)
  • 1 hour lunch will be on your own. 7.0 AIA CEU credits available
  • No door registration will be available, you must pre-register.

Register Here

Anyone is invited to attend, but in order to be registered with California Emergency Management Agency (CalEMA) Safety Assessment Program (SAP) you must be a Building Official, Building Inspector, Registered Architect or Registered Engineer (see full list below):

Cal OES Safety Assessment Program Approved Licenses & Certifications
Card Designation Prof. License/Cert Agency
Architect, Any state
Civil Engineer Civil Engineer, Any state
Structural Engineer Structural Engineer, Any state
Geotechnical Engineer Geotechnical Engineer, Any state
Engineering Geologist Engineering Geologist, Any state
Building Inspector DSA School Construction CA DGS/ DSA Inspector, Classes 1 & 2
Building Inspector OSHPD Hospital Inspector CA OSHPD Class A
Building Inspector Registered Const. Insp. Div. II ACIA
Building Inspector Building Inspector ICC
Building Inspector Combination Inspector ICC
Building Inspector Combination Dwelling Inspector ICC
Building Inspector Commercial Building Inspector ICC
Building Inspector Residential Building Inspector ICC
Building Inspector Residential Combination Inspector ICC
Building Inspector Building Plans Examiner ICC
Building Inspector Combination Plans Examiner ICC
Building Inspector Building Code Official ICC
Building Inspector Certified Building Official ICC
Building Inspector Master Code Professional ICC
Public Works Inspector Registered Const. Insp. Div. IV ACIA
Public Works Inspector Construction Inspector City of Los Angeles


New Night School Course on the Seismic Design of a Low-Rise Building Begins February 5th!

Deeply discounted 2nd Edition Seismic Desighn Manuals offered to all registrants!

Night School 16: Seismic Design in Steel - Concepts and Examples

Presented by Rafael Sabelli

Sessions will take place on Monday nights, 7 p.m. Eastern.

This course, based on the 2010 Seismic Provisions and Seismic Design Manual, 2nd Ed., is intended to provide engineers with guidance so that they are ready to apply the AISC seismic design requirements correctly and efficiently on typical projects in regions of moderate or high seismicity. The course includes conceptual treatment of the principles of seismic design so that engineers understand the intent and basis of the AISC requirements. It also includes a long design example that provides more specific guidance on the application to the design of a low-rise building. The example will be extrapolated from the Seismic Design Manual.

2/5/2018 Session 1: Seismic Design Concepts - Course Introduction
2/12/2018 Session 2: Seismic Design Concepts - Moment Frames
3/5/2018 Session 3: Seismic Design Concepts - Braced Frames
3/12/2018 Session 4: Seismic Design Concepts - Design
3/19/2018 Session 5: Application - Design Example Setup
3/26/2018 Session 6: Application - Building Analysis/Diaphragms
4/2/2018 Session 7: Application - Moment Frames
4/16/2018 Session 8: Application - Braced Frames

Registration, pricing and PDH information can be found here.

Learn more about AISC Live Webinars and Night School and register today!

Upcoming Webinars from Woodworks with a focus on mass timber design
Webinars are held from 12:00-1:00 PM Central.

Education Credits:
WoodWorks is approved to provide continuing education through AIA, ICC and FBPE.  Attendees will qualify for 1 AIA/CES HSW LUs, PDH credits, or .1 ICC credits by attending a live webinar. Webinar recordings are not eligible for credit.
All webinars are free of charge. 

Contact Karen Droste with any questions. 

Click on logo for web site.

It's Not Too Late! Register to Attend SJI's Webinar: Nothing Flat About Steel Joists and Steel Deck on a Pitched Roof

Steel joists and steel deck are used to construct economical pitched roofs. This session will provide designers with details and design guidance to help with this situation. Included will be guidance on designing and detailing pitched diaphragms, and economical hip roof framing details.

The learning objectives include:

  • Describe the factors which impact sloped seats on steel joists.
  • Identify the unique considerations for designing and specifying special profile steel joists.
  • Summarize the general concerns with steel deck on sloping roofs, and how to properly specify its support.
  • Explain the interaction of uplift and shear in steel roof deck diaphragms, and how diaphragms are affected by hip roofs.

April 18, 2018
Individual - $75 per person Earn 0.15 CEUs or 1.5 PDHs
Site - $300
3:00 pm - 4:30 pm (EDT)